7 Tips: How To Maintain Hydraulic Hammer/Breaker?

Hydraulic Breaker is a perfect attachment to demolish rock, concrete and other construction materials in a short time. This attachment can work for many years only if while using and storing, special attention is paid. On the other side, lack of proper care can grab almost its half of hydraulic hammer lifespan.
hydraulic hammer

Therefore, we have highlighted the top 6 tips to care for the hydraulic Hammer/ breaker.


  • Conduct Complete Visual Inspection 
  • Use Right Tool According To Project Requirement 
  • Check Hydraulic Hose 
  • Regular Greasing Is Essential 
  • Use The Right Tool Point 
  • Inspect Nitrogen Pressure 

  • Conduct Complete Visual Inspection 
It just takes a few minutes to inspect hydraulic breaker condition before beginning demolishing, many many operators overlook this step. This simple inspection assists the operator for any worn or part damages and can prevent major accidents at the project site. Therefore, it is essential to check hydraulic hoses, the attachment pins, tool retainers, breaker shell, and locks before going to use. If you found andy crack or gouges, fix it immediately or do not use breaker until you get approval from an expert. 

  • Use Right Tool According To Project Requirement 
Many hydraulic breaker manufacturers use special books to check breaker’s lower bushing, top angle and retaining pins. Using them wisely reduces the chances of breaker failure during operation. How to use hydraulic breaker/hammer tool kit? This can be trouble for many. But keep in mind, there is a retainer pin in the hydraulic hammer, remove it with the help of maintenance tool. Once it gets removed, you get the opportunity to check and detect issues in the hammer. If there are wear and tear, fix it immediately.
The next big thing is breaker’s brushing. If it gets flat, fit it in an end to end. Otherwise replacing will be a good option. It takes just 15 to 30 minutes to replace. Check and replaces to rather than bearing project delay cost from a minor issue.

  • Check Hydraulic Hose 
Hydraulic needs to be of the correct length and routed properly to shorten work time. As per the expert’s opinion, it must not be too short or long. Both cases suffer your work. For example, if it will be short, it will create an issue in the movements of the breaker and too long will distract the demolishing process. Therefore, fixing the correct length will be ideal for every operator. 

  • Regular Greasing Is Essential 
After hosing, regular greasing has a prominent role in the smooth working of the breaker. Therefore, it is essential to keep checking, lubricating and clearing tools from debris at the end of demolition. There is a different type of special greases available in the market, just take advice from your manufacturer or service provider, which will be best for your breaker. This will also prevent metal from rusting. 
Many experts belives grease is a better solution over grease. As it is prepared from high temperature and serves your device long-lasting life. Another benefit of using grease is that it can be done manually or by machine. This is highly beneficial than automatic greasing. It travels more than lubricant and helps to brush up broken tools and equipment. 

  • Use The Right Tool Point 
Hydraulic breakers work effectively with different tools. If the right point is used for the right job, it can extend your breaker’s life. Some of the widely uses points for demolition projects are:

  1. Blunt tool point: This can easily break while working on concrete or heavy construction buildings. 
  2. Chisel tool point: It helps in controlling breaker when used for hammer for cutting concrete 
  3. Pyramidal tool point: a perfect solution to break hard rocks or abrasive materials. 

  • Inspect Nitrogen Pressure 
Checking and inspecting nitrogen charge pressure depends on completely outside work stiffness. There must be different nitrogen level to break different rocks. You can also see user manual to check and inspect the nitrogen level. Even if you hire a hydraulic breaker from a demolition hire company, you can also ask them to check and inspect. Most the companies ask for your project and set on their own. 

The hydraulic breaker is a costly attachment. Therefore, whether it is yours or rented, due care is essential to save from high repairing and major accidental damages.

Comments

Post a Comment

Popular posts from this blog

Five Dust Control Tips for Construction Sites

Image
  Nearly all building site managers appreciate the growing importance of dust control measures these days. Both contractors and clients are increasingly aware of the importance of the construction industry's environmental responsibilities in relation to climate change. This means that you must take steps to ensure that water sources are clean and safe. It also means protecting people and buildings nearby from particles. This basically means that dust control measures must be in place to stop dust from spreading. Dust control is a responsibility that all construction companies must take seriously. Too much dust borne contamination by small particles of dust can lead to banning orders from local authorities in many parts of the West. This could cause significant delays to the project. Dust control is also important for the industry's reputation. It is trying to be a good neighbour when ongoing works are underway. Dust control measures are being used on construction sites to prote
Read more

Different Advantages of Hiring Construction Equipment!

Image
From the past few years, renting construction equipment has increased in popularity for a variety of reasons. Such quality construction equipment like concrete mixers, jumping jack compactor, dirt compactors, and others are featured with certain safety precautions that can easily lower the risks of accidents and raise productivity and efficiency. Hiring quality construction equipment can implement the task in a short period of time, which further helps in saving money and cost.  Renting earthmoving equipment Australia has become a viable option and provides the ability to cut costs and run a more financially stable construction business. There is a wide range of operated and self-drive construction suitable for both small sites and large site operations. However, let's have a look at the following advantages of hiring construction equipment. Table of Content Advantages of Hiring Construction Equipment Less Maintenance and Avoid Replacement Responsibility Maximiz
Read more

Essential Tips for Choosing the Right Hydraulic Bucket Grab for Your Project

Image
  Choosing the right hydraulic bucket grab for your project involves considering several key factors to ensure it meets your requirements and operates effectively. Here are some essential tips to consider: Understanding the Project Requirements: Identify the type of materials you'll be handling (e.g., soil, rocks, debris). Determine the weight and volume of materials to be lifted or moved. Assess the working conditions, such as the terrain, environmental factors, and space limitations. Bucket Grab Type: Select the appropriate type of bucket grab based on the materials and application. There are various designs, including clamshell, orange peel, and multi-tine grabs, each suitable for specific materials and tasks. Size and Capacity: Consider the size and capacity of the bucket grab needed to efficiently handle the intended materials. Ensure it has the right dimensions and lifting capacity to accommodate the load without overloading the equipment. Hydraulic System Compatibility: Chec
Read more